STAGE ONE
|
Sediment Filter, 5-Micron Polyspun Cartridge 2 1/2” dia. x 10″ |
STAGE TWO (optional)
|
10 Activated Carbon Block Filter 5 Micron 2 1/2” dia. x 10″ |
STAGE THREE
|
Activated Carbon Block Filter 5 Micron 2 1/2” dia. x 10″ |
STAGE FOUR
|
Reverse Osmosis Membrane 36 GPD TFC @ 65 PSI Pressure Differential |
STAGE FIVE
|
Granular Activated Carbon Post-Filter In-Line, 2” dia. x 10” |
TANK
|
4.0 Gallon Plastic Tank (metal tank available) Pre-pressurized with Butyl Bladder (2.5 gal. water capacity when full) |
Specifications
Shipping Weight:
4-stage 25 lb.
5-stage 28 lb.
Dimension:
4-stage 14”W x 6”D x 18”H
5-stage 15.5”W x 6”D x 18”H
Tank: 11″ dia. x 15.5″H
Conditions of Use
Water Must be microbiologically safe
Temperature, 40 -100 degrees F
pH Range, 3 to 10
Feed pressure, 40 to 100 psig
Maximum TDS, 1500 PPM
Turbidity, less than 1.0 NTU
GreenMachine™ with Revtex 1:1 Membrane
Only 1 gallon of water is wasted for each gallon of fresh water produced
The Vertex GreenMachine™ uses the new RevtexTM 1:1 high-efficiency 50 GPD RO membrane to send less water to the drain. Only 1 gallon of water is wasted for each gallon of fresh water produced, significantly reducing the waste-water by up to 75% compared with standard RO membranes. This state-of-the art membrane is manufactured using special membrane material along with an improved design to make a 50% recovery rate possible at typical municipal water pressure of 40-100 psi. The system also uses NSF and WQA certified Greenblock® Carbon block filters which are made with eco-friendly coconut-shell greencarbon™ that is manufactured using a process which significantly reduces harmful green-house gas emissions. Every household should have an point-of-use RO system which will remove an average of 95% of the dissolved solids from the incoming water including dangerous contaminants like arsenic, chromium 6, nitrates, lead and cysts.
The 5-stage system is designed to ensure water quality, membrane performance and filter life, where the incoming water contains a high amount of sediment as in some well water systems. An extra pre-filter stage is added before the membrane. This design can also be used to extend time between filter changes.
Comes complete and ready to install with dispensing faucet and instruction manual.
Download the GreenMachine Brochure.
Features
• Revtex 1:1 sends 4x less water to the drain*
• Revtex 1:1 membrane fits standard membrane housings
• Eco-Friendly Greenblock® carbon filtration media
• Uses city water pressure to operate the RO membrane
• 4 and 5-stage versions available
• Auto shut-off valve (conserves water)
• Flow restrictor – modified capillary
• Long reach, non-airgap faucet
• Feed water connection
• Drain clamp
• 1/4 inch flexible polyethylene tubing with QC fittings compression fittings
• 1 year limited warranty
*compared to traditional Reverse Osmosis systems
Ordering Information | Part No. | |
---|---|---|
4-Stage Reverse Osmosis | PT-4GR | |
5-Stage Reverse Osmosis | PT-5GR | |
Available Options | ||
with UV Sterilizer add /UV | add /UV | |
with Air Gap Faucet (meets many city's requirements) | add /AG | |
with Metal Tank | add /MT | |
with 3/8" line from tank to faucet | add /3/8 | |
with 3/8" Feed Water Adapter | add /3/8FWA | |
with 1/2"-3/8" John Guest Convertible Feed Water Adapter | call factory | |
ProTekk Water Tray and Leak Detector | add LDDT-1218 | |
Replacement Filters | ||
5 micron Sediment cartridge, 2.5" x 10" | SF-4001 | |
GreenBlock Carbon Block cartridge, 2.5" x 10" | CF-4100 | |
GAC inline post filter, 2" x 10" | IF-4103 | |
Revtex 50 GPD Membrane | MAD-4230 | |
Certified 4-stage Filter Replacement Kit | FK-100G |
For Sales, Service or Parts, contact